Monday, August 3, 2009

VESPA LX/S 125 CC |VESPA LX/S 150 CC 2009

2009 VESPA LX 125-150 cc

2009 VESPA LX 125-150 cc2009 VESPA LX 125-150 cc Pic

The Vespa S and Vespa LX, were now released with the new electronic ignition in the 125 and them versions 150cc. The new system of fuel injection means cleaner engines and a greater effectiveness, with these models of Vespa uniting the remainder of the range for modern technology and the traditional model.

After the abandonment of the carburettors, the valve at four times and binocular, the engines water-cooled are more powerful now, with the couple increased at the lower word rates. The Vespa S of Vespa LX and now comprise reduced fuel consumption and the emissions, with sports name the scooter.

Us 'about corrupted for the choice this summer with a range of the scooters outside there! Vespa LX and S the sector available in various colors (I like orange!), Although no evaluation was released. See after the jump for full press release and Specs. techniques of Vespa.

2009 VESPA S 125-150 cc2009 VESPA S 125-150 cc Pic

VESPA LX/S 125,150 CC Specification:
  • Single cylinder
  • 4 stroke, electronic injection
  • Bore/stroke 57/48.6 mm (125 i.e.) 62.8/48.6 mm (150 i.e.)
  • Engine Capacity 124 cc and 151 cc
  • Max power at crankshaft
  • 7.9 kW (10.7 hp) at 8,250 rpm (125 i.e) 8.9 kW (12.1 hp) at 8,000 rpm (150 i.e.)
  • Max torque 9.6 Nm at 6,500 rpm (125 i.e.) 11.8 Nm at 6,250 rpm (150 i.e.)
  • Fuel Unleaded petrol
  • Timing System SOHC (single overhead cam), two valves per cylinder
  • Cooling system Forced air
  • Lubrication Wet sump
  • Starter Electric
  • Clutch Automatic dry centrifugal clutch with vibration dampers
  • Transmission Twist-and-go CVT with torque server
  • Load bearing structure Sheet steel body with welded reinforcements
  • Front suspension Single sided link arm with coil spring and dual action monoshock
  • Rear suspension Coil spring with adjustable preload and dual action hydraulic shock absorber
  • Front wheel rim Die-cast aluminium alloy 2.50×11”
  • Rear wheel rim Die-cast aluminium alloy 3.00×10”
  • Front tyre Tubeless 110/70-11”
  • Rear tyre Tubeless 120/70-10”
  • Front brake Hydraulically operated 200 mm ø stainless steel disc
  • Rear brake Mechanically operated 110 mm ø drum
  • Length/ width 1,770/740 mm
  • Seat height 785 mm
  • Wheelbase 1,280 mm
  • Fuel tank capacity 8.2 litres
  • Emissions compliance Euro 3

No comments:

Post a Comment